We're always here to help. Check out FAQs to assist you with your project

or if you can't find what you're looking for - please call - we're always pleased to help

.

FAQs – PP32, Metal Roofing & Cladding System

4° installed, design to 4.5° – 5° to allow for site tolerances.
No, PP32® is a through fix system and requires fixing to the support system below.
For a standard 0.7mm Liner and a PP32® top sheet you would require 250mm* of λ0.040 Quilt – allow an additional 10% for compression. *purlin centres greater than 1.000m. For additional information, build-ups or U-Values please contact us.
For occasional light foot traffic you must only walk on the crowns of the PP32® roof sheets. Do not walk in the pans of the sheets.
FAQs – SpeedZip, Metal Roofing & Cladding System

1.5° installed, design to 2° – 2.5° to allow for site tolerances.
Yes, a mechanical seamer and installation tools are available for hire, please contact us for details and hire charges.
The SpeedZip® sheets are fixed to the structure via an extruded aluminium Halter. The SpeedZip® Halter can be fixed to either a light gauge bar & bracket system / purlin or to a timber structure with two fixings suitable for the substrate.
For a standard 0.7mm Liner and a SpeedZip® top sheet you would require 250mm* of λ0.040 Quilt – allow an additional 10% for compression. *purlin centres greater than 1.100m. For additional information, build-ups or U-values please contact us.
Yes – it is possible to factory smooth curve or crimp curve the SpeedZip® sheets. Due to different curving criteria and materials available please contact us with your required radii.
For a standard road delivery – 13.6m sheet lengths, longer sheets are available upon request subject to site access. An on-site rolling option is also available.
For occasional light foot traffic you must only walk on the seams of the SpeedZip® roof sheets. Do not walk in the pans of the sheets.

.

FAQs – SpeedDeck, Metal Roofing & Cladding System

1.5° installed, design to 2° – 2.5° to allow for site tolerances.
No, the SpeedDeck® system is a secret fix system which requires no mechanical seaming.
The SpeedDeck sheets are fixed to the structure via an engagement clip. The SpeedDeck clip can be fixed to a light gauge bar & bracket system / purlin with two centrally located light gauge SD fixings or to a timber structure with four SD timber fixings.
For a standard 0.7mm Liner and a SpeedDeck® top sheet you would require 250mm* of λ0.040 Quilt – allow an additional 10% for compression. *purlin centres greater than 1.000m. For additional information, build-ups or U-values please contact us.
Yes it is possible to factory smooth curve or crimp curve the SpeedDeck® sheets. Due to different curving criteria and materials available please contact the technical department with your required radii.
For a standard road delivery – 13.6m sheet lengths, longer sheets are available upon request subject to site access. An on-site rolling option is also available.
For occasional light foot traffic you must only walk on the crowns of the PP32® roof sheets. Do not walk in the pans of the sheets

Solution Finder

System Building Products Limited

Throughout history, the building industry has taken on a myriad of shapes, styles and textures. Whether in response to emerging technologies, new approaches, anticipation of future trends or a respectful take on the past, architecture is a living reminder of how our urban environment has evolved and continues to evolve year on year. Architecture today needs to deliver on so much, from meeting standards and environmental ratings to maximising value and achieving uniqueness.

At System Buildings Products, we understand this, and by combining our expertise and your project needs, we will deliver the systems and results you expect.